Chassis & Suspension
Get the best products at the lowest prices on chassis and suspension components!
- 4-Links & Components
- Anti-Roll Bars
- Back-Halfs
- Ballast, Lead & Weight Bars
- Bottle Mounts & Billet Clamps
- Brackets, Gussets & Tabs
- Drag Race Chassis Kits
- Engine Mounting
- Ladder Bars & Components
- Rear End Housings & Components
- Street Chassis & Front Clips
- Struts & Components
- Shocks, Springs & Accessories
- Wheelie Bars & Components
- Wishbones & Diagonal Links
-
Narrow BB Ford Hemi Motorplate
Quarter-Max
$193.99Narrow BB Ford Hemi Motorplate Specifications• Made of 6061-T6 1/4" aluminum • 31" overall width• 24-1/2" notch width Note: This motorplate requires qty-4 #217065 press-in bushings. Sold separately.RJ-213110-1$193.99 -
Nitrogen Bottle
Quarter-Max
$167.99Replacement nitrogen bottle for the Nitrogen Shock Filling Kit #219527.Bottle comes unfilled.RJ-219528$167.99 -
Nitrogen Shock Filling Kit
Quarter-Max
$341.99This Nitrogen Shock Filling Kit includes a 2.5 lb bottle and an adjustable regulator with a coiled hose and air chuck installed.Coil hose rated up to 125# working pressure. Bottle comes unfilled.RJ-219527$341.99 -
NOS Bottle Mount
Quarter-Max
$14.99This is the base to your Nos bottle mount kit 0.063" thick 4130. Hole size 5.375"RJ-410079$14.99 -
Nos Bottle Mount Base Single
Quarter-Max
$25.99Thickness 14 gauge Made of Cold Rolled Mild SteelRJ-410335$25.99 -
Offset BBC Motorplate
Quarter-Max
$381.99Use this BBC offset motor plate when replacing a 5.3 bore spacing with a 5.0 bore space motor . It has a 1.5" offset. Offset BBC Motorplate Specifications• Made of 6061-T6 1/4" aluminum • 31" Overall Width • 25" Notch...RJ-213225$381.99 -
$16.99
-
Olds Drilled & Tapped Housing Ends
Strange Engineering
$150.00DescriptionStrange Housing EndsSold as pair Requires O-Ring Style Axle Bearings Features• 1026 billet steel• Butt weld design• For 3″ or 3 1/4″ OD tubing• Designed & machined by Strange• Material made in the USA...STR-H1142$150.00 -
Olds Housing Ends
Strange Engineering
$140.00DescriptionStrange Housing EndsSold as pair Requires O-Ring Style Axle Bearings Features• 8620 forged chrome moly steel• Butt weld design• For 3″ or 3 1/4″ OD tubing• Black oxide finish• Designed & machined by...STR-H1132$140.00 -
PAC Racing Spring, 12 in. x 2.5 in. ID x 225 lb., Orange
PAC Racing Springs
Retail: $60.00Now: $40.00Was: $60.00PAC Racing manufactures high quality, high travel, high endurance suspension springs for use in racing and aftermarket applications.Specifications:• Length: 12 in.• Inside diameter: 2.5 in. ID• Spring rate: 225 lb.• Color: OrangeSold...PAC-12X2.5X225-ORGRetail: $60.00Now: $40.00Was: $60.00 -
PAC Racing Spring, 14 in. x 2.5 in. ID x 275 lb., Orange
PAC Racing Springs
Retail: $60.00Now: $40.00Was: $60.00PAC Racing manufactures high quality, high travel, high endurance suspension springs for use in racing and aftermarket applications.Specifications:• Length: 14 in.• Inside diameter: 2.5 in. ID• Spring rate: 275 lb.• Color: OrangeSold...PAC-14X2.5X275-ORGRetail: $60.00Now: $40.00Was: $60.00 -
PAC Racing Spring, 8 in. x 2.5 in. ID x 125 lb., Orange
PAC Racing Springs
Retail: $60.00Now: $40.00Was: $60.00PAC Racing manufactures high quality, high travel, high endurance suspension springs for use in racing and aftermarket applications.Specifications:• Length: 8 in.• Diameter: 2.5 in. ID• Spring rate: 125 lb.• Color: OrangeSold...PAC-8X2.5X125-ORGRetail: $60.00Now: $40.00Was: $60.00 -
PAC Racing Spring, 8 in. x 2.5 in. ID x 350 lb., Orange
PAC Racing Springs
Retail: $60.00Now: $40.00Was: $60.00PAC Racing manufactures high quality, high travel, high endurance suspension springs for use in racing and aftermarket applications.Specifications:• Length: 8 in.• Diameter: 2.5 in. ID• Spring rate: 350 lb.• Color: OrangeSold...PAC-8X2.5X350-ORGRetail: $60.00Now: $40.00Was: $60.00 -
Panhard Bar
Quarter-Max
$119.99This Panhard Bar is a good method of centering your rear end in your car or truck and it will provide a good ride! The kit comes with 1/4” thick mild steel tabs to mount on your frame and rear end housing. The 4130 tube is 1-1/4” x ...RJ-300050$119.99 -
$5.99
-
$2.99
-
$6.99
-
$17.99
-
Penske Shock Mount
Quarter-Max
$8.99Penske shock mount is made of 0.050" thick 4130 chromolyRJ-410167$8.99 -
Penske Spanner Wrench
Penske
$7.99Designed specifically for adjusting the springs on Penske coil over shocks and struts. Eliminate the old hammer/screwdriver technique by using this wrench.PEN-TL89PL$7.99 -
Penske Spring Guide
Quarter-Max
$40.99Guides spring into spring seat and helps to protect threads on the shock. Fits 8760 and 7500 series shock only. Sold EachRJ-420527$40.99 -
Pinion Center Line Gauge
Quarter-Max
$56.99This tool is designed to help you find the exact pinion center line of your rear end housing. Use this tool when you install your brackets on your rear end housing or install your housing ends. It bolts to the face of your rear end housing and has a slot...RJ-304000$56.99 -
$15.99
-
Plated Weight Bar
Quarter-Max
$148.99Add weight nearly anywhere simply by filling this weight bar with lead pellets or shot. Made from 2" x 3" rectangular tube, this 14" long weight bar comes completely welded with welded bung, aluminum cap, and bolt sleeves for mounting. This item is Zinc...RJ-219102-2$148.99 -
$5.49
-
$4.99
-
Pneumatic Shock Timer Bleed Off System
Quarter-Max
$238.99Use of this Pneumatic Shock Bleed-Off Timer System allows the shocks to be stiff on the launch and then soften up to give you a smoother ride over any bumps down track. When air pressure is applied to most pneumatic shocks, the rebound is stiffened to...RJ-214305$238.99 -
Pro 500 Ford Hemi Motorplate
Quarter-Max
$193.99Pro 500 Ford Hemi Motorplate Specifications• Made of 6061-T6 1/4" aluminum • 33" Overall Width • 27-1/4" Notch Width Note: This motorplate requires qty-4 #217065 press-in bushings. Sold separately.RJ-213219$193.99 -
Pro Drag Strut
Penske
$6,995.00 - $10,244.99The Pro Drag Strut is the result of many years of development in drag racing combined with 20+ years of shock absorber technology used with success in the highest levels of Motorsport. The Pro Drag Strut is intended for use (and is approved for...PEN-PS75DBDRAG$6,995.00 - $10,244.99 -
$11.99
-
$9.99
-
Pro Mod Aluminum Housing with Carbon Brakes
Strange Engineering
$8,950.00ApplicationPro Mod VehiclesUsing 16″, 17″, 18″, 19″, 20″, 21″, 22″, or 23″ 4-link centers DescriptionUltra 4-Link Modular Floater Housing AssemblyIncludes Pro Carbon brake kitChoice of 4 3/4″,...STR-H1180$8,950.00 -
Pro Mod Aluminum Housing, Includes Stainless Steel Brakes
Strange Engineering
$6,950.00ApplicationPro Mod VehiclesUsing 16″, 17″, 18″, 19″, 20″, 21″, 22″, or 23″ 4-link centers DescriptionUltra 4-Link Modular Floater Housing AssemblyIncludes 2 piece steel rotors & aluminum caliper...STR-H1182$6,950.00 -
Pro Mod BBC Motorplate
Quarter-Max
$221.99Pro Mod BBC Motorplate Specifications• Made of 6061-T6 1/4" aluminum • 30-5/8" Overall Width • 25" Notch Width Note: This motorplate requires qty-4 #217065 press-in bushings. Sold separately.RJ-213221$221.99 -
Pro Mod Lightweight Motorplate Installation Kit
Quarter-Max
$71.99This is the light weight version of part#213122 with lightning holes. This 4130 Chromoly kit welds to your chassis for easy placement and bolting of your motorplate. Kit includes water jet 4130 brackets and all hardware for installation...RJ-213123$71.99 -
$15.99
-
$21.99
-
Pro Mod Motor Plate Gusset
Quarter-Max
$5.99This is the gusset from the (Pro Mod Motor Plate Install Kit) Part #213122 Material 0.090" 4130 Sold EachRJ-410574$5.99 -
Pro Mod Motor Plate Mount Base
Quarter-Max
$8.99This is the base bracket from the (Pro Mod Motor Plate Install Kit) Part #213122 Material 0.090" 4130 Sold EachRJ-410588-1$8.99 -
Pro Mod Motor Plate Mount Bracket
Quarter-Max
$19.99This is the main bracket out of our (Pro Mod Motor Plate Install Kit) Part #213122 Material .090" 4130 Sold EachRJ-410443$19.99