Our Quarter-Max wing kit comes complete with aluminum top and spill plates, long wing struts and mounts, hitch pins, aluminum piano hinge, and all hardware necessary. Includes the Quarter-Max Wing Support Kit #209202. Specifications:•...

Our Quarter-Max wheelie bars are made from 1 in. OD x .058 in. wall 4130 top bars and cross tube. The main tubes come with tig welded wheel housing brackets installed. it comes complete with rod ends, steel wheels, pull pins, and all the hardware...

These weld on Quarter-Max Wheelie Bar Rear End Housing Brackets are the choice for non-ladder bar and non-4-link door car applications. They provide an excellent and inexpensive way to support your wheelie bars.Specifications:•...

Wishbones are the preferred way to mount and keep the rear end housing in the center of the car. Wishbones offer more strength and less flexibility than a diagonal link.Our Quarter-Max Wishbone Kit comes complete with rod ends, housing mounts, and all...

The Quarter-Max Weld-On Tether System is NHRA accepted for the new NHRA Collector Tether rule for 2014 requiring all slip-on Header Collectors for all classes in the NHRA to be tethered. Quarter-Max Weld-on Tether System: Each kit will do one pair of...

The QM Universal 4-Link Rails is the perfect way to narrow the rear of your chassis to accept extra-wide racing tires. Our frame rails are of universal design, making them adaptable to any car from Pro Street to Drag Race. The specially engineered...

Our Quarter-Max tie rod tube kit easily adapts the early Pinto rack & pinion to virtually any application. This kit simply slips over and welds to the stock Pinto tie rods. It can be trimmed to fit any chassis width. Kit includes tubes, rod ends, jam...

Our Quarter-Max Throttle Rod makes installing your throttle linkage easy. The solid rod is threaded on both ends and comes complete with rod ends and all hardware needed to install it. Available in 18" or 24" long.

Quarter-Max Steering Column Kit, Non-SFI Disconnect, Single U-JointThis kit comes complete with a 5-bolt non-SFI steering disconnect, self lubricating bushings, coupler, and one u-joint.

Quarter-Max Steering Column Kit, Non-SFI Disconnect, Double U-JointThis kit comes complete with a 5-bolt non-SFI steering disconnect, self lubricating bushings, coupler and two u-joints.

This assembly allows all electrical power to be shut off for safety purposes. Features an easy and presentable inside installation. Complete with lever, hardware and 125 amp switch. (welding required)

The perfect way to narrow the rear of your chassis to accept extra-wide racing tires. Our frame rails are of universal design, making them adaptable to any car from Pro Street to Drag Race. The specially engineered profile allows adequate clearance for...

Made from 3/16” mild steel with bushing mount welded on. Comes with Nylon bushing.  Sold each.

This simple toe hook allows you to easily update your QM throttle pedal to be able to disengage a stuck throttle with the top of your foot. Simply drill and bolt the hook to your pedal. Fits 3/4" OD tubing.

Our Quarter-Max door hinge kit features mounting brackets which are longer than most of this style to offer more support to the doors when open. This kit comes with long and short mounting pins to make door removal easier. Includes all hardware needed...

Diagonal link kits are a very simple method to center the rear end.The Quarter-Max Diagonal Link Kit comes with 1" O.D. x .058" wall 4130 tube, mild steel rod ends, steel clevises with a 5/8" hole and grade 8 hardware. Welding required.For cars with a...

These are the replacement lock nuts for the QM Collector Tether System part#214514       10-32 metal to metal lock nut. This lock nut does not have nylon inside.   Sold Each   

The Quarter-Max Clutch Linkage Kit includes a 12 in. long 4130 tube, right & left hand tube adapters, mild steel rod ends and jam nuts.For additional strength, step up to our Pro Series Clutch Linkage Kit, which uses 4340 high misalignment rod ends...

For your convenience, we offer two styles of brake pedal push rods. The Quarter-Max Brake Pedal Push Rod (shown above) is one piece constructed from 6061-T6 Aluminum. Clevised on one end and tapped on the other, this is the easiest and quickest way to...

Wishbones are the preferred way to mount and keep the rear end housing in the center of the car. Wishbones offer more strength and less flexibility than a diagonal link.Our Quarter-Max Wishbone Kit comes complete with rod ends, housing mounts, and all...

Secure your power plant with the Quarter-Max Battery Tray, designed for racers who prioritize weight distribution and structural integrity. This heavy-duty, weld-in solution offers a permanent, vibration-resistant mount for any standard single battery...

Quarter-Max's 9 in. Ford fabricated housings are available in widths of 45 in. or 60 in. and feature a 1/4 in. thick face plate drilled on a CNC mill to provide accurate stud locations. The housing covers are cut on our in-house water jet from a single...

Fabricate your own 9 in. Ford housing with our Quarter-Max fabricated housing kit. Kit includes a Quarter-Max 9 in. Ford housing face plate, banjo, inside bulkhead support, 45 in. or 60 in. short and long axle tubes, fill cap and bung, drain plug and...

Our one-piece wheel tubs are available in a variety of sizes and in either carbon fiber/fiberglass or lightweight carbon fiber (carbon/carbon). The lightweight carbon fiber wheel tubs are constructed of carbon fiber and reinforced with carbon fiber...

Our Carbon Fiber Universal Four-Piece Trunk Floor Kit makes finishing the trunk of your car quick and easy. Simply trim in various places and screw/rivet together to give you a custom fitted radiused carbon trunk floor.This item will have a discounted...

This is lightweight pure carbon fiber inner pan can be trimmed to fit your hood scoop.

This lightweight carbon fiber sheet comes in a 1 ft x 4 ft piece. It can be used to make specialty panels for your dash, ignition, or any other projects that require carbon fiber. Specifications:• Size: 1 ft x 4 ft• Thickness: .060 in.•...

Pull Pin Lanyard, 3/8 in. x 4 in.Specifications:• Style: Pull Pin Lanyard• Grip Length: 4 in.• Pin Diameter: 3/8 in.

Pull Pin, 5/16 in. x 1 in.Specifications:• Grip Length: 1 in.• Pin Diameter: 5/16 in.Sold individually.

Pull Pin, 3/8 in. x 1 in.Specifications:• Grip Length: 1 in.• Pin Diameter: 3/8 in.Sold individually.

Pull Pin, 3/16 in. x 13/16 in.Specifications:• Grip Length: 13/16 in.• Pin Diameter: 3/16 in.Sold individually.

Pull Pin, 3/16 in. x 1/2 in.Specifications:• Grip Length: 3/16 in.• Pin Diameter: 1/2 in.Sold individually.

Pull Pin, 1/4 in. x 1 in.Specifications:• Grip Length: 1 in.• Pin Diameter: 1/4 in.Sold individually.

Pull Pin, 1/2 in. x 1 in.Specifications:• Grip Length: 1 in.• Pin Diameter: 1/2 in.Sold individually.

This kit includes our pro series wing support kit plus brackets, struts, and hardware necessary to secure spill plates to your pro series or custom carbon wing. Includes 4 wing struts with rod ends, mounts, hitch pins, stainless steel pull pins and all...

This kit includes 4 wing struts with rod ends, mounts, hitch pins, stainless steel pull pins, and all hardware.

Our Pro Series Steering Column Kit is designed to mount easily in any chassis. Features steel tubing and an aircraft quality u-joint with sealed lubrication (for tight motor compartments or header clearance). This kit also includes a column tube with...

Constructed of 4130 Includes 2 weld-on bosses for chassis Features wraparound strap for the fuel cell and hardware Designed to mount a Jaz Pro Stock 1.5 or 2 gallon fuel cell (not included) and fuel pump (not included) Due to variations in the...

Our ultimate clutch linkage kit is used in construction of our Pro Stock cars. Kit includes 2 in. tapped link, 4340 high misalignment rod ends and jam nuts. Welding required.

The Pro Series Clutch Linkage Kit includes a 12 in. long 4130 tube, right & left-hand tube adapters, 4340 high misalignment rod ends and jam nuts. Welding required.