This Advance RPM Control Module sets rpm limits based on rpm acceleration or time since launch. Features:• Plugs into CAN-Bus Bridge• Use with Power Grid Controller• 4-Connector CAN-Bus Hub is required Note: Please make sure your MSD-7730...

The Power Grid Ignition System is the next evolution of our Programmable 7-Series Ignition Controls. The Grid incorporates an efficient 32 bit microcontroller and an all new software program, called MSD View, and is USB compatible. The Windows based...

The 7AL-3 allows you to make adjustments any time you want. It packs high voltage with four step retards, three rev limits and an rpm switch. All of the features are adjusted using plug-in modules including the 3-Step Rev Control and Multi-Step Retard...

You’ll recognize the 7AL-2 Plus Ignition Control, as its predecessor is the most popular ignition control used in drag racing. The “Plus” model updates the original 7AL-2 with improved internal components with an added a 2-Step Rev...

This 4130 mount welds to your chassis for easy placement and bolting of your motorplate.    

This 4130 Chromoly kit welds to your chassis for easy placement and bolting of your motorplate. Kit includes laser cut 4130 brackets and all hardware for installation. Welding required.

Material .090" 4130

0.090" thick 4130

Thickness .090" Made of 4130

Material: .090" 4130    

Quarter-Max is the first to offer this ultra trick Morse Cable Pivot Mount. You can mount your throttle, fuel shut off, or parachute cable without any binding. CNC machined from 6061-T6 billet stock and features a set screw to lock the cable in place...

DescriptionStrange Housing EndsSold as pair Features• 1026 billet steel• Butt weld design• For 3″ or 3 1/4″ OD tubing• Black oxide finish• Designed & machined by Strange• Material forged in the USA...

  Mopar Hemi Pro Stock Motorplate Specifications• Made of 6061-T6 1/4" aluminum  • 33" overall width • 27-1/4" notch width Note: This motorplate requires qty-4 #217065 press-in bushings. Sold separately.

Red push button switch used for horn button or any momentary function. Mounts in 1/2 in. hole and used on panels up to 1/4 in. thick. Sold individually.

This V-Net module allows users to monitor any analog sensor (travel, pressure, etc.) that utilizes 5 volt power. This analog function module has been programmed for general usage, and has not been assigned to a specific task. Use of this...

Bright red incandescent bulb and night cover. Combine with temperature and pressure switches to warn driver of critical conditions. Includes light cover.

Single Plug Battery Charge Mount, SmallDesigned to mount our Single Plug Battery Charge Kit, Small RJ-214153. Brackets are made of .060 in. aluminum. Install by bolting or gluing to the body. The kit comes with qty-2 mounting brackets and hardware to...

Big Block Chevy 4.840” bore center Mild Steel 3/8” thick flanges Primary tube size 2-1/4” and 2-3/8” or 2-3/8” and 2-1/2” available Megaphone merge collectors 3-1/2” to 4-1/2” X 14-1/2” Long ...

This easy to install kit gives you the perfect mounting points for your midplate and eases motor placement.

Weld this bushing into the chassis to mount your midplate.Specifications: • Bottom I.D.: .375"• Top I.D.: 1"• O.D.: 1.250"• Width: 1.375"• Material: 4130

Made of 4130

Material .125" 4130

Corner Stone mechanics shirt offer a relaxed and rugged vibe with a Quarter-Max logo on the front left pocket and a RJ Race Cars logo across the back. 2 button-up front pockets. 35/65 cotton/polyester blend.WAS $38.00NOW $25.00

For use with 214118 which can be ordered here.

Specifications:• Material: SteelFor use with the RJ-214118 250-Amp Disconnect Switch.

Can be used to mount your master cylinder to the firewall or driver's floor. Comes with 4130 laser cut .125" mounting bracket and .090" support gusset. Hardware included. Welding required.

Can be used to mount your master cylinder to the firewall or driver's floor.   Material .125" 4130   Hole sizes 0.350"

Master Cylinder cover kit with Hardware. The cover is made of Carbon/Carbon fiber, comes with bracket and bolts.

The 2nd generation alloy steel U-bolt kit is a result of information gained on Mark Williams driveshaft torsion testing machine. The older version, 3/8" 1350 u-bolt was prone to cycle failure when cycle testing at high torque levels. The one-piece U-bolt...

This Launch Rev Limiter Switch Box, also known as a Manual Launch Control, lets you change the launch rpm setting of the MSD-7531 Programmable Digital-7 Plus Ignition Control when you are in the car. Features:• Instantly changes the launch RPM...

The cutting-edge Magnum Grip design, coupled with the race-tested performance of the Pro Bandit shifter is an unbeatable combination! Complete kit includes the features of the standard Pro Bandit shifter plus the billet aluminum Magnum Grip handle...

ProStar EFI Large 2-Port EFI Bypassing RegulatorFeatures:• Guided-metering valve provides precise control, requires less maintenance•Unique guided-metering valve assembly provides accurate metering of fuel flow•Magnafuel EFI Regulators...

Machined to accept RJ-203106 Pro Series Tie Rod Tube Kit.   Specifications:• Tube end machined to .370"   Sold each.

5/8″-18 Flanged Lug Nut• Provides secure clamping force• 15/16″ wrench sizeSold in package of 10.

Finally, a lug wrench made for drag racers! Our t-style lug wrench measures 20 in. to the t-handle, giving it more than enough reach for the deep wells on drag racing rims. Our lug wrench is plated and features a 15/16 in. socket end.Sold individually.

Used in Strange 5/8″ stud kitsProtects wheel face from lug nut damagePrevents lug nut from bottoming out on stud shoulder 6061-T6511 Billet Aluminum• Strong & lightweight• Premium material protects from deformation under heavy...

Lucas Slick Mist Tire & Trim Shine is a treatment spray exclusively formulated by Lucas Oil Products designed to give Tires and Trim a long lasting “like-new” shine. Use Slick Mist Tire Shine to remove dull, grey oxidation from Bumpers,...

Lucas Slick Mist Interior Detailer is a spray treatment exclusively formulated by Lucas Oil Products designed to clean and protect like nothing you’ve ever used. Spray as needed onto interior surfaces such as plastic, vinyl, leather, rubber and...

Thickness .040 Made of 4130

These are the same control arm mounts used at RJ Race Cars. The .125" thick brackets are made of 4130. .095" thick gussets for added strength. NAS bolts, jet nuts, AN washers and misalignment bushings are included. Welding required.