Mount this to the wall in your trailer, or anywhere to store your tire ramps in a convenient place.    

Material .025"  4130

Use our pinion stand to help make setting your pinion angle easier. Place the stand under your housing and use a scissor jack to adjust your pinion angle to the desired setting. Black powder coated finish. 

ApplicationDana 60 / Strange S60Housings cast with snubber mounting pad DescriptionLimits pinion risePrevents excessive leaf spring wrap

Guides spring into spring seat and helps to protect threads on the shock. Fits 8760 and 7500 series shock only. Sold Each

Designed specifically for adjusting the springs on Penske coil over shocks and struts. Eliminate the old hammer/screwdriver technique by using this wrench.              

Penske shock mount is made of 0.050" thick 4130 chromoly

Add nitrogen to your Penske shocks with this unit. Comes with Case  

The 8760PB-Drag is our best shock option for drag racing. The 8760 is a high quality piggy back triple adjustable shock that uses standard Penske parts. With separate high and low speed compression adjustability, and separate rebound adjustability,...

The Pro Drag Strut is the result of many years of development in drag racing combined with 20+ years of shock absorber technology used with success in the highest levels of Motorsport. The Pro Drag Strut is intended for use (and is approved for...

The Drag Inerter Shock is the most advanced shock option for drag racing. The Drag Inerter is a high quality triple adjustable shock that now brings Formula 1 Racing shock technology to drag racing. The Drag Inerter Shock is a must have for Pro Mod/Pro...

The 7500 series double adjustable, coil over shock provides the versatility of separate compression and rebound adjustments without the use of an external reservoir. Like all Penske Racing Shocks, it is easily adjustable and revalvable. Penske Racing...

Bolt-on shock canister mount.

3/16" 1008/1020 This is the bracket to the QM Inboard Pedal Mount Part #RJC0217 Hole size 1.51"

Thickness .090 Made of 4130

Our new Nomex pedal boot kit gives your pedals a finished look. They also help to seal out exhaust fumes and track dirt. Comes complete with boot retaining ring and all nuts and bolts required for installation.

Thickness .050 Made of 4130

SMALL IN SIZE – HUGE IN FEATURES PRO-DIAL DIAL BOARD OUTPUTS-- (2) Fiber optic outputs capable of of controlling TWO Pro-Dial dial boards. Automatically sends your dial-in to any of our Pro-Dial dial boards. No need for a separate controller...

PRO-CUBE II with Z-FORCE “CARBON ILLUSION” -the look of real carbon fiber without the expense. NEW! Z-FORCE™-This is a whole new concept for reacting to the tree. "ZERO" force required on the transbrake button once staged---thus...

.090" 4130

.090" 4130

Pneumatic parachute release for Safety Shut Off Controller: This kit will mount to the chassis and parachute handle. You plumb it to the air valve that comes with your Safety Shut Off Controller and it will deploy the parachute if the driver becomes...

Our parachute cord mount kit consists of laser cut 4130 Chromoly brackets, a Delrin bushing, bolt & lock nut. Welding required.

Everything you need to pull a single chute is in this kit. Available for single and dual chute systems. Includes 1/8" Handle

Keep both hands on the wheel when you use our new chute release system. Simply press the button on your steering wheel and your car’s air system pushes the chute handle for you.

ApplicationsStrange Steel Front Brake KitsUsing Single or 2 Piston Calipers SpecificationsNew – .480″Discard – .200″ Soft Metallic Brake Pad– Provides excellent starting-line cold holding power– Only material suitable...

ApplicationsAll Strange Front Steel Brake Kits with 4 Piston CalipersSeveral Strange Steel Rear Brake Kits SpecificationsNew – .480″Discard – .200″ Soft Metallic Brake Pad– Provides the best starting-line cold holding...

ApplicationsWilwood and JFZ 4 piston calipers SpecificationsNew – .480″Discard – .200″ Soft Metallic Brake Pad– Provides the best starting-line cold holding power– Only material suitable for use in front steel...

ApplicationsWilwood and JFZ 4 piston calipers SpecificationsNew – .480″Discard – .200″ Hard Metallic Brake Pad– Provides high resistance to brake fade– Recommended for vehicles going over 150 MPH in the 1/4 mile–...

ApplicationsSeveral Strange Steel Rear Brake Kits SpecificationsNew – .480″Discard – .200″ Hard Metallic Brake Pad– Provides high resistance to brake fade– Recommended for vehicles going over 150 MPH in the 1/4...

The RJ Overhead Switch Panel provides complete electrical control made from 5052 aluminum. Designed for easy overhead mounting and wiring. This panel has enough room for switches that it can be used to run nitrous systems. The box is fuseless, but with...

This overhead Nitrous Switch Panel has an awesome design. This panel is made from 5052 aluminum and has all the switches and buttons needed to operate a Nitrous Pro Mod car with 4 stages of Nitrous or less. Designed for easy installation and wiring. This...

Body exhaust rings, also referred to as body exhaust flanges, provide a professional, finished look while protecting the paint & body around the side exit headers. Includes hardware.Specifications:• Size: 7-1/8 in. x 5-7/8 in.• Style:...

Single pull double throw on/on toggle switch

Fuel pump switch on-off-test 2 pole toggle.

Cooling switch on-off-on 2 pole toggle.

Ignition switch on-off 2 pole toggle.

On-off single pole toggle.

DescriptionStrange Housing EndsSold as pair Requires O-Ring Style Axle Bearings Features• 1026 billet steel• Butt weld design• For 3″ or 3 1/4″ OD tubing• Designed & machined by Strange• Material made in the USA...

DescriptionStrange Housing EndsSold as pair Requires O-Ring Style Axle Bearings Features• 8620 forged chrome moly steel• Butt weld design• For 3″ or 3 1/4″ OD tubing• Black oxide finish• Designed & machined by...