This motor plate is made from 1/4" thick 6061-T6 aluminum and has a Small Block Chevy bolt pattern. This motor plate is profiled. Fits Aurora Short Block only. Specifications• Made of 6061-T6 1/4" aluminum • 32" overall...

Thickness .125" Made of 4130

Thickness .125" Made of 4130

Our custom built Pro Stock chassis is designed to meet the special demands of your chosen class. Each welded RJ chassis is fabricated by skilled craftsmen and heli-arc tig welded on a surface plate jig to achieve maximum precision and unmatched quality...

So you want to build a truck? We have just the chassis kit for you. These kits are based off the now defunct Pro Stock Truck class and come with detailed blueprints and individually numbered tubes. Much of the required bending has been done. Tubing must...

Stroud Safety is the leader in the non-rigid aerodynamic decelerator field (i.e. drag chutes). These chutes were designed from the start to be user friendly. Stroud Safety has nearly 50 years experience in parachute design and manufacture. After much...

Stroud Safety is the leader in the non-rigid aerodynamic decelerator field (i.e. drag chutes). These chutes were designed from the start to be user friendly. Stroud Safety has nearly 50 years experience in parachute design and manufacture. After much...

Stroud Safety is the leader in the non-rigid aerodynamic decelerator field (i.e. drag chutes). These chutes were designed from the start to be user friendly. Stroud Safety has nearly 50 years experience in parachute design and manufacture. After much...

2 Gallon Pro Stock Fuel CellFeatures:• Seamless cross-linked polyethylene outer shell• Aircraft style flush mount assembly• Includes safety foam• Carries SFI certification with foamSpecifications:• Style: Pro Stock• Size: 2...

The MagnaFuel fuel pump part# MP-4401 is designed for vehicles NOT subject to emission controls. The PRO STAR 500 series can be run continuously up to 1-1/2 hours for limited street driving. The MP-4401 is a precision assembly for maximum performance...

The MagnaFuel fuel pump part# MP-4450 is designed for vehicles NOT subject to emission controls. The PRO STAR 500 series can be run continuously up to 1-1/2 hours for limited street driving. The MP-4450 is a precision assembly for maximum performance...

This is the same wing kit we put on all Pro Stock cars built at RJ Race Cars. Constructed of .050" thick aluminum and comes complete with a removable wickerbill, spill plates, and all hardware. This wing can be made for NHRA or IHRA cars. Includes Pro...

This is the best pedal kit available, PERIOD! 4130 Chromoly. Spherical beaings. Knurled clutch and brake pedal pads. Comes with everything you need to mount the brake and clutch pedals, including hardware. Use the same kit the pros are switching to and...

Quarter-Max's Pro Series 4-Link Kit was designed to hold up to high horsepower and has been race proven on RJ Race Cars for years. This kit features our high quality 1-1/4 in.x.095" 4130 Pro Series 4-link bars. This is a stronger upgrade that comes...

Quarter-Max's Pro Series 4-link chassis brackets were designed to hold up to high horsepower and have been race proven on RJ Race Cars for years. They are manufactured in-house to high quality specifications with precise hole locations and smooth...

The release bearing is constructed utilizing a sealed bearing with a tool steel contact face.  The sealed design eliminates bearing run out and will not sling grease out on to the clutch assembly as traditional bearings commonly do. ...

Use this kit to ease the installation of new rack & pinions to the chassis. Kit includes the 4130 mounting brackets, 4130 tubing, screws, and nylock nuts.Welding required.

The MSD Pro Power Coil is designed short duration applications such as drag racing. Features:• High voltage coil designed for short duration applications only• Primary and secondary windings are encased in Ciba polyurethane for vibration...

Keep damaging dirt and debris out of your carbs by using this simple scoop plug. Simply press into the hood scoop opening when your car is not running, no tools necessary. Fits the RJ-211915 D-Opening Pro Mod Low Back Fiberglass Hood Scoop and the...

Our pro dual parachute mounts are designed for cars with a low rear section height. They are notched for cord clearance along with having pre-welded pack mounts constructed of 3/8" 4130. They are designed to deploy the 2 chutes in separate directions for...

.125 thick, made of 4130

Apply this vinyl sicker the plate of your Overhead Nitrous Switch Panel #214160

PRO MOD STRUT MOUNT .125 THK 4130

Our new 4130 Steel Pro Mod Single Wheelie Bar Kit features a unique design that incorporates dual top tubes tested and race proven by our Pro Mod teams. This is the strongest single wheelie bar available on the market today while still weighing in at...

Similar to 213221, but made to fit blocks with the cam moved up 1". The coolant hole is left small, so the user can determine the amount of restriction they want and enlarge as needed.  Pro Mod Raised Cam BBC Motorplate...

This is the main bracket out of our (Pro Mod Motor Plate Install Kit) Part #213122   Material .090" 4130   Sold Each 

This is the base bracket from the (Pro Mod Motor Plate Install Kit) Part #213122   Material 0.090" 4130   Sold Each

This is the light weight version of part#213122 with lightning holes. This 4130 Chromoly kit welds to your chassis for easy placement and bolting of your motorplate. Kit includes water jet 4130 brackets and all hardware for installation...

This 4130 Chromoly kit welds to your chassis for easy placement and bolting of your motorplate. Kit includes water jet 4130 brackets and all hardware for installation. Welding required.

This is the gusset from the (Pro Mod Motor Plate Install Kit) Part #213122   Material 0.090" 4130   Sold Each

Material .090" 4130

.125 Thick. Made of 4130

Doubler plates are designed to weld to the 4-link brackets to add thickness and strength around the 4-link holes, while adding a minimal amount of weight. This additional strength increases bracket longevity and improves consistency by preventing hole...

Doubler plates are designed to weld to the 4-link brackets to add thickness and strength around the 4-link holes, while adding a minimal amount of weight. This additional strength increases bracket longevity and improves consistency by preventing hole...

This Pro Mod Double X kit features 80 in. in length and will accommodate up to 20 in. center to center width. Main tubes, upper tubes and main cross member are 1-1/4 in. OD x .065 in. W 4130. X braces are 1-1/4 in. OD x .049 in. W 4130. Wheel...

Pro Mod BBC Motorplate Specifications• Made of 6061-T6 1/4" aluminum • 30-5/8" Overall Width • 25" Notch Width  Note: This motorplate requires qty-4 #217065 press-in bushings. Sold separately.

3 Gallon Pro Modified Fuel CellFeatures:• Seamless cross-linked polyethylene outer shell• Aircraft style flush mount cap assembly• Includes safety foam• Carries SFI certification with foamSpecifications:• Style: Pro...

Pro Ladder Bar Hoop BracketSpecifications:• Thickness: 3/16"• Material: Mild steelSold each.

.090 thick 4130

.090 thick 4130