Electrical, Ignition & Data Systems
-
Air Solenoid Valves & Air Switches
-
Batteries & Accessories
-
Delay Boxes, Dial Boards & Timers
-
FuelTech USA
-
Gauges
-
MSD Ignition
-
LED Lights
-
Racepak & Data Systems
-
Radio Communications & Mounts
-
Starters & Accessories
-
Switch Panels & Wiring Supplies
-
Weather Stations
-
EGT-4 CAN, 2 Rotor - with Harness & 2 Sensors
FuelTech USA
$537.004 channel conditioner for Type K thermocouples with CAN communication for PowerFT ECU's. FEATURES:• The FuelTech EGT-4 CAN is compatible with any type K thermocouple (grounded junction or not).• 4 channel signal conditioner with CAN bus...FT-5022007368-2ROTOR$537.00 -
EGT-4 CAN, 3 Rotor - with Harness & 3 Sensors
FuelTech USA
$616.004 channel conditioner for Type K thermocouples with CAN communication for PowerFT ECU's. FEATURES:• The FuelTech EGT-4 CAN is compatible with any type K thermocouple (grounded junction or not).• 4 channel signal conditioner with CAN bus...FT-5022007368-3ROTOR$616.00 -
EGT-4 CAN, 4 Cylinder - with Harness & 4 Sensors
FuelTech USA
$695.004 channel conditioner for Type K thermocouples with CAN communication for PowerFT ECU's. FEATURES:• The FuelTech EGT-4 CAN is compatible with any type K thermocouple (grounded junction or not).• 4 channel signal conditioner with CAN bus...FT-5022007368-4CYL$695.00 -
EGT-4 CAN, 4 Rotor - with Harness & 4 Sensors
FuelTech USA
$695.004 channel conditioner for Type K thermocouples with CAN communication for PowerFT ECU's. FEATURES:• The FuelTech EGT-4 CAN is compatible with any type K thermocouple (grounded junction or not).• 4 channel signal conditioner with CAN bus...FT-5022007368-4ROTOR$695.00 -
EGT-4 CAN, 6 Cylinder - with 2 Units, 2 Harnesses & 6 Sensors
FuelTech USA
$1,232.004 channel conditioner for Type K thermocouples with CAN communication for PowerFT ECU's. FEATURES:• The FuelTech EGT-4 CAN is compatible with any type K thermocouple (grounded junction or not).• 4 channel signal conditioner with CAN bus...FT-5022007368-6CYL$1,232.00 -
EGT-4 CAN, V8 - with 2 Units, 2 Harnesses & 8 Sensors
FuelTech USA
$1,390.004 channel conditioner for Type K thermocouples with CAN communication for PowerFT ECU's. FEATURES:• The FuelTech EGT-4 CAN is compatible with any type K thermocouple (grounded junction or not).• 4 channel signal conditioner with CAN bus...FT-5022007368-V8$1,390.00 -
ETM-1 EGT Conditioner
FuelTech USA
$89.00Thermocouple Conditioner type K with 0-5v output. SPECIFICATIONS:• Type K thermocouple conditioner• One channel• 0-5V analog output• Voltage: 12V• Used with WB-O2 Datalogger or PRO24 Datalogger• EGT thermocouple not included...FT-3010002630$89.00 -
Firewall Feed-Thru
MSD
$25.57Use this Firewall Feed-Thru to route the spark plug wire through the firewall. Features:• 1/2" insulation so the coil's spark reaches the distributor• Prevents voltage leaksClick here to download the MSD-8211 Firewall Feed-Thru...MSD-8211$25.57 -
Fixed Rotor, for MSD-8445
MSD
$30.70Replacement Rotor - Fits MSD-8445 MSD Distributor Rotors are molded form high quality, voltage insulating material to resist carbon tracking while ensuring that the ignition spark reaches the spark plug terminals. For optimum voltage carrying...MSD-8423$30.70 -
Fluid Temperature Sensor, 0-300°F
Racepak
$77.85This sensor is commonly used to measure the temperature of fluids such as water or engine and transmission oil where the temperature does not exceed 300°F.RAC-810-TR-300$77.85 -
Ford 289/302 Pro-Billet Distributor
MSD
$420.95The Ford 289/302 Pro-Billet Distributor is for Ford enthusiasts that are serious about performance. Just under the brass terminals of the MSD cap and rotor is an easy-to-adjust mechanical advance assembly. The assembly is fine blanked from chro-moly...MSD-8598$420.95 -
Ford 289/302 Ready-To-Run Distributor
MSD
$584.95This distributor comes complete and ready-to-run. All you need to do is drop it in the engine, connect three wires and fire the engine. Each distributor features an ignition module that produces a powerful inductive spark to improve combustion of the...MSD-8352$584.95 -
Ford 302 Pro-Billet Small Diameter Distributor
MSD
$430.95This Ford Pro-Billet Small Diameter Distributor fits 289/302 engines. To be less obtrusive for Ford engines, this distributor is designed into a special compact housing. The diameter of the special cap and housing are 5/8” smaller than stock Ford...MSD-8579$430.95 -
Ford 351C-460 Pro-Billet Distributor
MSD
$440.95This Ford 351C-460 Pro-Billet Distributor features a special compact housing designed to be less obtrusive for Ford engines. The diameter of the special cap and housing are 5/8” smaller than stock Ford distributors providing extra room in front of...MSD-8577$440.95 -
Ford 5.0L Black Pro-Billet Distributor
MSD
$481.95Add a stealth look to your Ford 5.0L with an MSD Black Pro-Billet Distributor. This is a direct drop-in replacement for 86-93 5.0L EFI engines. When you start making serious power with your EFI Ford, the stock distributor shaft is one of the weak links...MSD-84563$481.95 -
Ford 5.0L Pro-Billet Distributor
MSD
$461.95This Ford 5.0L Pro-Billet Distributor uses a stock-style trigger pick-up to accept factory connectors. For installation, you simply remove the stock distributor and bolt the Pro-Billet MSD in place. Each model is supplied with a high-quality cap with...MSD-8456$461.95 -
Ford COP, Modular, SOHC, 4.6L/5.4L, 3-Valve, 8-Pack
MSD
$359.95The Blaster Coil-on-Plug design puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine. The new Ford Coil-on-Plug Coils are designed as a direct bolt-in replacement coil for many Single...MSD-82438$359.95 -
Ford COP, SOHC, 4.6L/5.4L, 2-Valve, 8-Pack
MSD
$279.95The Blaster Coil-on-Plug design puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine. The new Ford Coil-on-Plug Coils are designed as a direct bolt-in replacement coil for many Single...MSD-82428$279.95 -
Ford DIS 4 Tower Coil Pack
MSD
$109.95The Ford DIS 4 Tower Coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as...MSD-8241$109.95 -
Ford HEI Distributor Cap
MSD
$51.20The V8 distributor caps offer improved locking connections and the Rynite material is extremely strong with excellent dielectric properties. Includes the wire retainer.MSD-8408$51.20 -
Ford Street Fire Coils, 4.6/5.4L, 2-Valve, 8-Pack
MSD
$235.95These coils mount directly in place of factory style versions and accept the OEM connectors as well.MSD-55128$235.95 -
Ford Street Fire Coils, 4.6/5.4L, 3-Valve, 8-Pack
MSD
$235.95These coils mount directly in place of factory style versions and accept the OEM connectors as well.MSD-55138$235.95 -
Ford TFI Coil, High Performance
MSD
$71.70This coil has been designed by combining MSD's Blaster Coil experience with E-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that...MSD-8227$71.70 -
Ford V8 TFI Distributor Cap & Rotor Kit, 1985-1995
MSD
$51.20The cap and rotor of any ignition system must be considered maintenance items. Be sure to replace the cap and rotor as a set.• Distributor Cap & Rotor Kit, Ford V8 TFI, 1985-1995MSD-8482$51.20 -
FT Fuel Injector, 320 LB/H, O-Ring/-4 AN Fitting
FuelTech USA
$319.00The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required. FEATURES• REAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all...FT-5010108747$319.00 -
FT Fuel Injector, 320 LB/H, O-Ring/-4 AN Fitting, Set of 4
FuelTech USA
$1,276.00The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required. FEATURES• REAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all...FT-5010108747-4$1,276.00 -
FT Fuel Injector, 320 LB/H, O-Ring/-4 AN Fitting, Set of 8
FuelTech USA
$2,552.00The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required. FEATURES• REAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all...FT-5010108747-8$2,552.00 -
FT Fuel Injector, 320 LB/H, O-Ring/-6 ORB Fitting
FuelTech USA
$319.00The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required. FEATURES• REAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all...FT-5010108749$319.00 -
FT Fuel Injector, 320 LB/H, O-Ring/-6 ORB Fitting, Set of 4
FuelTech USA
$1,276.00The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required. FEATURES• REAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all...FT-5010108749-4$1,276.00 -
FT Fuel Injector, 320 LB/H, O-Ring/-6 ORB Fitting, Set of 8
FuelTech USA
$2,552.00The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required. FEATURES• REAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all...FT-5010108749-8$2,552.00 -
FT Fuel Injector, 320 LB/H, O-Ring/O-Ring Fitting
FuelTech USA
$279.00The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required. FEATURES• REAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all...FT-5010108504$279.00 -
FT Fuel Injector, 320 LB/H, O-Ring/O-Ring Fitting, Set of 4
FuelTech USA
$1,116.00The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required. FEATURES• REAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all...FT-5010108504-4$1,116.00 -
FT Fuel Injector, 320 LB/H, O-Ring/O-Ring Fitting, Set of 8
FuelTech USA
$2,232.00The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required. FEATURES• REAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all...FT-5010108504-8$2,232.00 -
FT Fuel Injector, 520 LB/H, -4 AN/-6 ORB Fitting
FuelTech USA
$375.00The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required. FEATURES• REAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all...FT-5010108249$375.00 -
FT Fuel Injector, 520 LB/H, -4 AN/-6 ORB Fitting, Set of 4
FuelTech USA
$1,500.00The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required. FEATURES• REAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all...FT-5010108249-4$1,500.00 -
FT Fuel Injector, 520 LB/H, -4 AN/-6 ORB Fitting, Set of 8
FuelTech USA
$3,000.00The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required. FEATURES• REAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all...FT-5010108249-8$3,000.00 -
FT Fuel Injector, 520 LB/H, O-Ring/-4 AN Fitting
FuelTech USA
$375.00The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required. FEATURES• REAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all...FT-5010108245$375.00 -
FT Fuel Injector, 520 LB/H, O-Ring/-4 AN Fitting, Set of 4
FuelTech USA
$1,500.00The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required. FEATURES• REAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all...FT-5010108245-4$1,500.00 -
FT Fuel Injector, 520 LB/H, O-Ring/-4 AN Fitting, Set of 8
FuelTech USA
$3,000.00The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required. FEATURES• REAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all...FT-5010108245-8$3,000.00 -
FT Fuel Injector, 520 LB/H, O-Ring/-6 ORB Fitting
FuelTech USA
$375.00The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required. FEATURES• REAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all...FT-5010108244$375.00