Chassis & Suspension
Get the best products at the lowest prices on chassis and suspension components!
- 4-Links & Components
- Anti-Roll Bars
- Back-Halfs
- Ballast, Lead & Weight Bars
- Bottle Mounts & Billet Clamps
- Brackets, Gussets & Tabs
- Drag Race Chassis Kits
- Engine Mounting
- Ladder Bars & Components
- Rear End Housings & Components
- Street Chassis & Front Clips
- Struts & Components
- Shocks, Springs & Accessories
- Wheelie Bars & Components
- Wishbones & Diagonal Links
-
Dodge Hemi Double Frame Rail Midplate
Quarter-Max
$216.99Dodge Hemi Double Frame Rail MidplateSpecifications:• Material: 6061-T6 aluminum• Thickness: 1/4"RJ-213207-1$216.99 -
Dodge Hemi Midplate
Quarter-Max
$214.99Dodge Hemi MidplateSpecifications:• Material: 6061-T6 aluminum• Thickness: 1/4"• Frame rail: 20.375"• NHRA Pro StockRJ-213207$214.99 -
Double Row Bearings & Retaining Rings
Moser
$269.99Bearings and retaining ring for the double row housing ends.Sold as a pair.MRE-9455$269.99 -
Dropped Down Liberty Bracket
Quarter-Max
$12.99This bracket is part of the Liberty Transmission Mount Kit. You can buy the items separately and weld them yourself. The kit makes removing and installing Liberty transmissions.RJ-410565-1$12.99 -
Dry Chemical Fire Bottle
Quarter-Max
$8.99This is the base for your dry chemical fire bottle kit 0.063" thick 4130.RJ-410342$8.99 -
Eibach Spring, 10 in. x 2.5 in. ID x 250 lb., Red
Eibach
$78.00Eibach coil over springs available in a full range of rates and sizes. Maximum travel in combination with smallest block heights. Ultra lightweight for reduced unsprung mass. Each spring individually tested. Highest linearity and guaranteed consistency...STR-1000.250.0250$78.00 -
Eibach Spring, 12 in. x 2.5 in. ID x 90 lb., Red
Eibach
$78.00Eibach coil over springs available in a full range of rates and sizes. Maximum travel in combination with smallest block heights. Ultra lightweight for reduced unsprung mass. Each spring individually tested. Highest linearity and guaranteed consistency...STR-1200.250.0090$78.00 -
Fire System Shut-Off Bracket
Quarter-Max
$5.99Mount this bracket for your Fire System Shut-Off 0.063" thick 4130RJ-410339$5.99 -
Ford 351 Windsor Motorplate
Quarter-Max
$150.99Ford 351 Windsor MotorplateSpecifications:• Material: 6061-T6 aluminum• Thickness: 1/4"• Size: 36" x 12"• Ford 351 WindsorRJ-213130$150.99 -
Ford 8.8 Housing Ends
Strange Engineering
$140.00Ford 8.8 weld-on housing ends for 3.150 bearing- pr. ApplicationHousing Using Mustang Brakes1986-1993 drum brakes DescriptionStrange Housing EndsSold as pair RequiresO-ring style ball bearings or Outer seal unit bearingsBacking Plate Hole Needs To Be...STR-H1138$140.00 -
$5.99
-
GM Midplate, Clutch
Quarter-Max
$227.99GM MidplateSpecifications:• Material: 6061-T6 aluminum• Thickness: 1/4"• ClutchRJ-213206-1$227.99 -
GXP/Cobalt DRCE Motorplate
Quarter-Max
$193.99DRCE Motorplate Specifications• Made of 6061-T6 1/4" aluminum • 32" overall width • 26-1/4" notch width Note: This motorplate requires qty-4 #217065 press-in bushings. Sold separately.RJ-213211$193.99 -
$22.99
-
Hyperco Spring, 10 in. x 2.5 in. ID x 300 lb., Blue
Hyperco
$78.00Hyperco springs are cold wound from preheat treated SAE 9254 chrome silicon wire. Optimum wire diameter is selected for the individual design without compromise. After coiling, the closed ends are ground, and the spring is thermally stress relieved,...STR-SP10300A$78.00 -
Hyperco Spring, 10 in. x 2.5 in. ID x 325 lb., Blue
Hyperco
$78.00Hyperco springs are cold wound from preheat treated SAE 9254 chrome silicon wire. Optimum wire diameter is selected for the individual design without compromise. After coiling, the closed ends are ground, and the spring is thermally stress relieved,...STR-SP10325A$78.00 -
Hyperco Spring, 10 in. x 2.5 in. ID x 550 lb., Blue
Hyperco
$78.00Hyperco springs are cold wound from preheat treated SAE 9254 chrome silicon wire. Optimum wire diameter is selected for the individual design without compromise. After coiling, the closed ends are ground, and the spring is thermally stress relieved,...STR-SP10550A$78.00 -
Hyperco Spring, 14 in. x 2.5 in. ID x 150 lb., Blue
Hyperco
$78.00Hyperco springs are cold wound from preheat treated SAE 9254 chrome silicon wire. Optimum wire diameter is selected for the individual design without compromise. After coiling, the closed ends are ground, and the spring is thermally stress relieved,...STR-SP14150A$78.00 -
Hyperco Spring, 7 in. x 2.5 in. ID x 250 lb., Blue
Hyperco
$78.00Hyperco springs are cold wound from preheat treated SAE 9254 chrome silicon wire. Optimum wire diameter is selected for the individual design without compromise. After coiling, the closed ends are ground, and the spring is thermally stress relieved,...STR-SP70250A$78.00 -
Hyperco Spring, 7 in. x 2.5 in. ID x 350 lb., Blue
Hyperco
$78.00Hyperco springs are cold wound from preheat treated SAE 9254 chrome silicon wire. Optimum wire diameter is selected for the individual design without compromise. After coiling, the closed ends are ground, and the spring is thermally stress relieved,...STR-SP70350A$78.00 -
Hyperco Spring, 8 in. x 2.5 in. ID x 350 lb., Blue
Hyperco
$78.00Hyperco springs are cold wound from preheat treated SAE 9254 chrome silicon wire. Optimum wire diameter is selected for the individual design without compromise. After coiling, the closed ends are ground, and the spring is thermally stress relieved,...STR-SP80350A$78.00 -
Hyperco Spring, 8 in. x 2.5 in. ID x 375 lb., Blue
Hyperco
$78.00Hyperco springs are cold wound from preheat treated SAE 9254 chrome silicon wire. Optimum wire diameter is selected for the individual design without compromise. After coiling, the closed ends are ground, and the spring is thermally stress relieved,...STR-SP80375A$78.00 -
$4.99
-
$14.99
-
$10.99
-
$17.99
-
Pro Mod Motorplate Installation Kit
Quarter-Max
$66.99This 4130 Chromoly kit welds to your chassis for easy placement and bolting of your motorplate. Kit includes water jet 4130 brackets and all hardware for installation. Welding required.RJ-213122$66.99 -
Pro Mod Mount Bracket
Quarter-Max
$220.49This bracket is used in Pro Mod application mounts, shifter to Lenco reverser.RJ-205111-2$220.49 -
Radius Tab, 4130, Fits 1-1/2 in. Tube, 3/8 in. Hole, 3/16 in. Thick
Quarter-Max
$5.99Radius TabSpecifications:• Material: 4130• Fits 1-1/2 in. tube• Hole Size: 3/8 in.• Thickness: 3/16 in.Sold individually.RJ-410734-1$5.99 -
$13.99
-
$5.49
-
Rear End Housing Wishbone Mount Support Gusset
Quarter-Max
$12.99Wishbone mount Material 0.125" 4130.RJ-410028$12.99 -
TFX Lightened Motorplate, 34" Overall Width
Quarter-Max
$216.99TFX Lightened MotorplateSpecifications:• Material: 6061-T6 aluminum • Thickness: 1/4"• Notch to notch: 26"• Overall width: 34" Note: This motorplate requires qty-4 #217065 press-in bushings. Sold separately.RJ-213112-1$216.99 -
$8.99
-
$7.99
-
Ultra Strut Package, Externally Adjustable, Lightweight Steel Brake Kit for Spindle Mount Wheels
Strange Engineering
$2,929.00Drag Race Use Only For Spindle Mount Wheels Require Wheels Designed For Anglia SpindlesThese are not the same as Strange aluminum strut spindles FeaturesCompact design suits low profile body stylesIntegral body & spindle allows piston to travel below...STR-PSS200$2,929.00 -
Wheelie Bar Pressure V-Net Module with Sensor, Right, 0-3000 PSI
Racepak
$368.95Pressure, Wheelie Bar, Right, 0-3000 PSI.Wheelie bar pressure is useful when trying to determine whether or not the chassis is "unloading" when launching. Used in conjunction with the Racepak wheelie bar load cell, these sensors clearly show how hard the...RAC-220-VP-PT-WBR3K$368.95 -
Wheels Up! Wheelie Bar Marker, White
Geddex
$8.99Used by a number of of Pro Stock car and motorcycle teams, Geddex has developed a formula that leaves a bright solid mark on the track to help tune your chassis to perfection. Wheels Up! transfers to the track surface easily, taking the guesswork of of...GED-111$8.99 -
11 in. Rear End Housing Faceplate for Wide 4-Link Centers
Quarter-Max
$309.99Faceplate for 11 in. rear end housing. For wide 4-link centers.Specifications:• Thickness: 3/8 in.• Material: 4130• Thread: 3/8-16 RHRJ-410895-1$309.99 -
2" Air Bottle Mount Base
Quarter-Max
$8.99This is the support bracket in 2-1/2lb air bottle mount kit is made of 0.125" thick 4130. Must be rolled to fit air bottle. Hole size 1"RJ-410114$8.99