MSD

The Pro Power HVC Coil is designed for racing applications with an MSD 7 Series Ignition Control. With a combination of extremely low primary resistance and the efficient design of an E-Core coil,...

This Shielded Magnetic Pick-Up Cable will help protect the trigger signal from the distributor or crank trigger pick-up from Electro Magnetic Interference. The pick-up wires are wound together and...

The Street Fire Ignition offers capacitive discharge technology and will fire a series of multiple sparks that last for 20° of crankshaft rotation when the engine is running at lower rpm. This...

Set includes terminals for engines with early type (socket) and late type (HEI “spark plug top”) distributor caps. 90° boots and terminals factory installed on one end.Routing spark...

If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6 or 7, the Blaster Coil line is the right choice. Our Blaster Coils are...

The new MSD Blaster LS Coil line is ideal for your modern GM muscle car or truck. The coils are designed as a bolt-in replacement and have been thoroughly tested and detailed by MSD's experienced...

This CAN-Bus Extension Harness provides 6 feet of extra length to reach your Power Grid System.Length: 6'

The V8 distributor caps offer improved locking connections and the Rynite material is extremely strong with excellent dielectric properties. Includes the wire retainer.

This coil has been designed by combining MSD's Blaster Coil experience with E-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This...

18” long, 90° terminals and boots are installed on both sides to connect to an HEI style terminal. A power wower is also supplied to adapt a socket style cap. Features:• Coil Wire,...

This Launch Rev Limiter Switch Box, also known as a Manual Launch Control, lets you change the launch rpm setting of the MSD-7531 Programmable Digital-7 Plus Ignition Control when you are in the car...

This Power Grid 4-Connector Hub will allow users of the Power Grid System to connect up to four MSD accessory modules. • Also known as a 4-Connector CAN-Bus Hub• Intended for use with MSD...

The Pro-Clamp will keep the plug wires in a tidy order and away from engine heat sources. Each separator features secure grooves for each wire and a top bracket snaps in place to sandwich the wires...

The cap and rotor of any ignition system must be considered maintenance items. Be sure to replace the cap and rotor as a set.Kit Includes:• MSD-8433 MSD Cap• MSD-8467 Race...

Molded from strong, durable Rynite material these rotors are designed specifically for MSD Crank Trigger Distributors. The rotor tip is secured with a screw for high rpm racing applications.Base...

The RPM Module Selector plugs directly into the rpm module socket on all MSD Soft Touch Rev Controls and accessories that use plug-in mod­ules. The user can then select between twelve different...

Routing spark plug wires is an art form. It takes patience and time to route your wires away from the headers, through separators and to the distributor cap. Some wire sets fit perfect, but a lot of...

Use this Tach Adapter if you are using the magnetic pickup input (green and violet wires) to trigger your MSD Ignition. It will correct the operation of most voltage-triggered tachometers that do not...

RPM Module Kits include five modules in 200 rpm increments. Each kit is within a 1,000 rpm range.

RPM Module Kits include five modules in 200 rpm increments. Each kit is within a 1,000 rpm range.

To cover all your bases, these wire sets are supplied with both the boot and terminals that fit older, socket style distributor caps, as well as the ones for spark plug-style terminals. Supplied with...

If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6 or 7, the Blaster Coil line is the right choice. Special 100:1 windings are...

Use this replacement harness to connect your MSD ignition box or timing accessory to your distributor or crank trigger. Specifications:• Length: 6'

Low-profile racing distributor, must be used with an MSD 6, 7 or 8-series ignition and a crank trigger. The unique design of these distributors fit tight intake systems while still transferring the...

If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6 or 7, the Blaster Coil line is the right choice. Special 100:1 windings are...

For use with GM style HEI distributors on V8 engines only. The MSD Digital Soft-Touch HEI Rev Limiter is designed to plug into nearly any HEI distributor and produces an accurate, smooth rev limiting...

The MSD Flying Magnet Crank Trigger system stabilizes ignition timing by using four magnets embedded in an aluminum wheel. Most crank triggers have a wheel, with steel studs sticking out, bolted to...

The Dodge Late Model Coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The...

This DynaForce Starter is used to crank over the reduced 4.4:1 gear set to deliver great torque to the engine’s ring gear to get the engine turning. The armature is balanced during assembly and...

This Ford Pro-Billet Small Diameter Distributor fits 289/302 engines. To be less obtrusive for Ford engines, this distributor is designed into a special compact housing. The diameter of the special...

Multiport EFI systems require a stable fuel supply to maintain best performance throughout the engine's rpm range. This high pressure and high flow Fuel Pump features a roller vane pump mechanism...

The MSD Magnetic Pick-Up replacement is the same high output assembly that is currently found in all MSD Distributors. It is supplied with the two pin connector installed. Features:• Replacement...

This special tool is an inexpensive way to make a set of custom plug wires. Provides a “die” to strip either 8mm Heli-Core or 8.5mm Super Conductor Wire, then can be used in a vise to...

MSD’s Non-Magnetic Pick-Ups are engineered for extreme applications. This Pick-Up was designed and tested on 300+ mph top fuel dragsters! 

The Power Grid Harness Adapter allows you to use your Digital-7 Programmable to install a Power Grid Controller with very little alterations. The harnesses are direct plug-ins for existing wires, but...

This Power Grid replacement wiring harness is designed for use with the MSD-7730 Power Grid Controller.

The Power Grid Ignition System is the next evolution of our Programmable 7-Series Ignition Controls. The Grid incorporates an efficient 32 bit microcontroller and an all new software program, called...

Two-piece adjustable rotor. Click here to download the MSD-84211 Rotor Phasing Kit Cap instructions.Click here to download the MSD-84211 tech information.

This RPM-Activated Switch will perform a variety of different functions from turning on a bulb or solenoid to activating an MSD Timing Control at a desired rpm.The RPM-Activated Switch, has two...

MSD boots are designed with longevity in mind. Each boot provides excellent heat resistance as well as maximum protection against spark loss. Features:• Custom fit for make and model...